ÖLFLEX® SOLAR XLWP

Naziv
Koda izdelka
Testna napetost
Nazivni presek vodnika (mm2)
Nazivni premer jedra
Cena
Količina
+
ÖLFLEX® SOLAR XLWP 1x4 WH/BK
1023601
6.5 kV
4 mm2
3.8 mm
0,79 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
ÖLFLEX® SOLAR XLWP 1x6 WH/BK
1023602
6.5 kV
6 mm2
4.4 mm
1,10 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, rok dobave 2-4 delovne dni.
+
ÖLFLEX® SOLAR XLWP 1x10 WH/BK
1023603
6.5 kV
10 mm2
5.6 mm
1,80 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
ÖLFLEX® SOLAR XLWP 1x16 WH/BK
1023604
6.5 kV
16 mm2
6.9 mm
2,79 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Min. količina za naročanje: 5000
Rok dobave sporočimo po obdelavi naročila.
+
ÖLFLEX® SOLAR XLWP 1x4 WH/BKRD
1023621
6.5 kV
4 mm2
3.8 mm
0,80 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
ÖLFLEX® SOLAR XLWP 1x6 WH/BKRD
1023622
6.5 kV
6 mm2
4.4 mm
1,10 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, predviden rok dobave 5-8 delovnih dni.
+
ÖLFLEX® SOLAR XLWP 1x10 WH/BKRD
1023623
6.5 kV
10 mm2
5.6 mm
1,81 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Min. količina za naročanje: 5000
Rok dobave sporočimo po obdelavi naročila.
+
ÖLFLEX® SOLAR XLWP 1x16 WH/BKRD
1023624
6.5 kV
16 mm2
6.9 mm
2,81 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Min. količina za naročanje: 5000
Rok dobave sporočimo po obdelavi naročila.
+
ÖLFLEX® SOLAR XLWP 1X6 WH/BKBU
1023626
6.5 kV
6 mm2
4.4 mm
1,10 €
*
*

Naročilu bo dodan strošek manipulacije in reza 15€ na rez

Na zalogi, rok dobave 2-4 delovne dni.

Benefits

  • Extruded colour stripe serves as reverse polarity protection during installation.
  • The alternative for water coverage, e.g. due to elevated water line caused by flooding
  • Reduction of flame propagation and of toxic combustion gases in the event of fire
  • Robust against mechanical impacts
  • Exact quantity control during installation by meter marking on the cable sheath

Applications

  • Photovoltaic systems with DC system voltage up to 1800 V
  • For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter
  • In September 2018 and based on AD8 watertightness, this product was recommended by Solartechnik Bayern for underground use typically realized via underground conduits/ ducts (...) for PV applications
  • Flexible or building-integrated PV systems
  • Underground use without protection conduit/ duct in professionally built cable trench with at least 50 cm of back-fill soil (70 cm underneath roads), above indicating tape, above covering plastic slab, above at least 10 cm of covering sand layer, above the cable laid on at least 10 cm high sand bed layer

Notes

  • Please find our standard lengths at: www.lappkabel.de/kabel-standardlaengen.
  • If applicable, the prices are solid metal prices without surcharges and VAT. Sales only to business customers.
  • Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
  • Photographs and graphics are not to scale and do not represent detailed images of the respective products.

KONTAKTIRAJTE NAS

Pošljite nam E-mail ali pa nas pokličite na +386 2 42 13 550